Product · Cable Trunking
Cable Trunking
Enclosed steel trunking for the runs that need to be protected, segregated, and tidy — inside switchrooms, risers, plant rooms, and the exposed service voids of modern offices. Widths from 50 to 600 millimetres with plain, perforated, or hinged covers. Pre-galvanised or Jotun powder-coated to match the architectural palette of the room.
Dimensions
Fabricatable ranges.
Every order is cut to specification. The ranges below describe what we fabricate as standard at the Tangerang line — extended dimensions are available on engineering request.
| Specification | Range |
|---|---|
| Widths | 50 – 600 mm |
| Depths | 50 – 150 mm |
| Material thickness | 1.0 – 2.5 mm |
| Standard lengths | 2400 mm · 3000 mm |
| Cover types | Plain · perforated · hinged |
| Finishes | Pre-galvanised · Powder-coated (Jotun) |
Applications
Where this line lives.
-
Switchroom and MEP-room segregation of power, control, and data circuits — each trunking sized to its cable family.
-
Riser shafts in high-rise towers, where fire-rated segregation drives every specification decision.
-
Exposed architectural runs in offices and hotels, powder-coated to the ceiling or wall colour.
Enclosed, segregated, specifiable
A Metosu cable trunking is a rectangular steel channel with a removable cover — plain, perforated, or hinged — bolted or clipped to structure. It separates circuits that must not share tray, protects cables from mechanical damage, and gives the services plan the discipline of a sealed enclosure rather than an open run.
Cover types
Plain covers for permanent concealment. Perforated covers for heat dissipation and visual transparency in showroom or compliance-inspected installations. Hinged covers for the service zones where maintenance access is daily — behind MDF panels, under raised floors, above demountable ceilings.
Finish for the visible work
Where the trunking is seen — the exposed service voids of modern Jakarta offices, ceiling feature strips in hotel lobbies — we finish on the Jotun line: 60-80 µm of dry powder coating, cured at 180°C, to any RAL. The surface holds its gloss through years of wear.
Next
Specify the right run for your project.